Chalk Paint Makeover- Dining Room

Recently, right in the midst of my moving and unpacking, I decided to give my dining room set a face lift.  It is a pretty nice looking antique set with rush seats.  I never had the nerve to do anything with it, while it was in a separate dining room.  Now, in this beach house- it is pretty much the center of the house.  I just wasn't happy with all that dark wood constantly in my view.

I heard about this chalk paint (Annie Sloan's Chalk Paint) from a decorator in my weekly painting group. She told me how she had tried it and that -most importantly- NO stripping, sanding, or priming of the old finish.  This set is really old and has been stained more than once.  I decided to go for it.  What's the worst that could happen, other than completely ruining an antique dining set?  I wasn't happy with it the way it was, so I figured it was worth the possibility of having to strip it down to bare wood if it didn't work out!  I looked online at many blog posts about people using it and it seemed to be pretty popular already.

I had ordered 2 cans of the paint and the soft wax used to seal it.  The paint is pricey ($35 per quart) but goes a long way.  I used the same quart of Aubusson Blue to paint the whole dining room- that's a table, 6 chairs, china cabinet, AND a buffet.  All with one tiny quart and I actually have a little left in the can.  All that, and a soap and water clean up!

I started out by trying it on my dark wood wine racks- using Old White.  I quickly realized how much I liked the paint, and was brave enough to move on to the larger furniture pieces.  The painting was easy, and then you just brush on some of the soft wax and buff it off.  I did buy the Annie Sloan wax even though I had read that Johnson's paste wax worked just as well.  I have to say that I used both waxes and the Johnson's was less soft, but also worked.

I definitely will be using this paint again. I have some wicker patio chairs just calling out to be painted- and a pint of Old White ready to go.

Stained Glass Window- In Vintage Window Frame

I haven't been painting for a few weeks, due to all the packing and pre-relocating craziness.  I did, however, get a chance to go to the stained glass studio and finish up my latest project.  I started learning stained glass a few years ago and have completed many windows and even a lamp shade- but this was my first project using lead instead of copper foil to construct the window.  I wanted to learn the process of working with lead since it is quite different. I have some old window frames at home that I have kept for this reason- stained glass.  Some of the window frames are from when we replaced all of our windows on Long Island.  My husband continuously tries, with no success, to get me to throw them out.

The first steps are the same as in the copper foil process- making the pattern and cutting the glass pieces.  Then, starting in one corner, I put my first 2 sides of the window (zinc strips) in and start working my way out from the corner.  One piece at at time, I fit the glass in, and cut the lead came strips to fit.  The glass pieces were all ground on the edges with the grinder, but often need more grinding to fit properly.  The glass pieces and came strips are kept in place with horseshoe nails as I go, to keep the window true to the pattern underneath.

The central design with the bevel pieces was simple since they came cut out already- more difficult to fit in sometimes, but already finished edges.

I chose to use clear glass for most of the design- the bevels, and 2 different patterns of clear (glue chip, and a ribbed border).  The outside border is blue streaky glass. 

I love the finished window and, for now, it will just stay on the easel since I am moving and don't need to decide which window to hang it in.  Since the old window frame it is framed with is a beach house window, it is fitting that it will be so near the ocean again.  Working with lead was a fun process, and I definitely plan to do more of these!